Panasonic KX-T336 System Reference Manual page 92

4.00
Out of Service (OUS)
Description
Allows you to change the status of cards, ports
and stations from "In Service" to "Out of Service."
The system should be in on-line communication
mode.
When setting the shelves or cards to "Out of
Service," then lower devices, such as stations,
For further information about Out of Service,
to Section 15-C-l .02 "OUS (Out of Service)
command."
Input Format
;OPE> jOUSlMp1
refer
ports etc. become "Out of Service" automatically.
Item numbers are same as those listed in 3.00 "In
(Password level : Two or higher) Service (INS)" on the previous page.
5.00 Remove (REM)
Description
Enables you to delete the stored system
programming data by specifying stations, Attendant
Consoles and so on.
The system should be in on-line communication
mode.
Specified terminal must be in Out of Service.
(Password leveLone)
Before you detach the installed devices, remove
the system programming data of associated
device using this command.
Input Format
;OPE> ~~~1
Device
Port
Station
Attendant console
Item Number
1011 to 3158
Explanation
Physical number
DN XXXX
or
1011 to 3158
Extension directory number (XXXX: three or four
digit number)
Physical number
Al or A2
or
1011 to 3158
Attendant Console number
Physical number
8-F-3