Time Overlap - Speco LS16 Operation Instruction Manual

⑭ Selecting a camera on the screen and clicking the right mouse button displays the text menu screen.
 Change Camera Title: Changes the camera name.
 Enable Audio: Plays audio while playing back recorded video that has recorded audio.
 Aspect Ratio: Changes the image aspect ratio.
 Deinterlacing: Using a deinterlace filter for interlaced video enhances image display
 Anti-Aliasing Screen: Enhances image display quality by eliminating stair stepping
NOTE: A camera name change in the Remote Search mode does not affect the camera name set up on the remote
site. Leaving the Camera Title blank causes the camera name set up on the remote site to display.

Time Overlap

If the DVR's time and date have been reset to a time that is earlier than the existing recorded video, it is possible for
the DVR to have more than one video stream in the same time range. In this case, you can search overlapping video
streams individually by selecting a specific segment. For example, when the DVR has recorded video from one to
five o'clock and the user changes the time backward from five to three o'clock and then continues recording until six
o'clock, there will be two video streams and segments from three to five o'clock.
You can search overlapping video streams by selecting a specific time or time range. If you want to search recorded
video at four o'clock during the overlapping time range using a search menu such as Go to the Date/Time, select the
segment you want to search.
If you want to search recorded video from four to five o'clock during the overlapping time range using a search menu
such as Event Log Search, Text-In Search or Motion Search, it is possible for the DVR to have two overlapping
start and stop times. You will be asked to select one of the overlapping start and stop times from the search time ranges
as follows:
 From four o'clock of the first segment to five o'clock of the first segment
 From four o'clock of the first segment to five o'clock of the second segment
 From four o'clock of the second segment to five o'clock of the second segment
(Single-Screen Layout Only)
quality by eliminating horizontal scan lines and noise in areas with motion.
(aliasing) effects in the enlarged image.
Digital Video Recorder
75