Setup Screen; Figure 5 - Login Screen; Figure 6 - Logout Screen; Figure 7 - Setup Screen - Speco LS16 Operation Instruction Manual

Operation Instruction
Throughout the screens you will see
reset that screen to its default settings. After you are finished with any setup screen, you can highlight Save and press
button to save the changes and exit the screen. If you do not wish to save the changes, highlight Cancel and
the
press the button to exit the screen.
Press the button or move the mouse pointer to the top of the screen and then select
MENU
Monitoring menu to enter the setup screens. The Login screen appears.
Figure 5 — Login screen.
NOTE: To assure the secure management of the system, setting up a password is strongly recommended.
If you cannot use the front panel buttons, click the
the virtual keyboard displays. See instructions below for using the virtual keyboard.
To log the user out of the system, press the
screen and then select
to confirm whether or not you want to log out the current user.
Figure 6 — Logout screen.

Setup Screen

Press the button or move the mouse pointer to the top of the screen and then select
MENU
Monitoring menu to enter the setup screen.
While setting up the DVR, there will be many opportunities to enter names and titles. When making these entries, a
Virtual Keyboard will appear.
12
. Highlighting the and pressing the
Select a User and enter the password by pressing the appropriate combination of
Camera number buttons and then the
logging in the admin user for the first time. If you do not know the password, click
the button for guidance.
MENU
(Logout) in the Live Monitoring menu. The Logout screen displays asking you
Figure 7 — Setup screen.
button gives you the opportunity to
button. There is no default password when
button using the mouse to enter a password, and
button or move the mouse pointer to the top of the
(Login) in the Live
(Setup) in the Live