Table of Contents
Advertisement
Operation Instruction
Highlighting the Panic Recording – Resolution and pressing the
resolution for Panic recording. You can select from: Very High (D1), High (Half D1) and Standard (CIF).
Schedule
Highlight Schedule in the Record menu and press the
< Simple Mode >
You can program the DVR to record only during certain times based on time, day of the week, and holidays. The smallest
time segment you can use is 15 minutes.
Highlighting Schedule On and pressing the
records video based on the schedule established in the Schedule screen. When turning Schedule recording Off, you
will be asked to confirm your decision, and
will function even when Schedule is turned off.
Highlight the Schedule Mode box and press the
Mode. Selecting Advanced Mode allows you to set up individual recording schedule for each event.
NOTE: Changing the schedule mode will reset all event and action statuses.
Highlight the + and press the
Highlight the box under the Day heading and press the
take place. Choose from: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F, Hol and All.
Highlight the box under the Range heading and press the
will take place. The smallest time segment you can use is 15 minutes.
Highlight the box under the Mode heading and press the
Choose from: No Record, Time, Event and Time & Event. (Simple Mode Only)
When the DVR is in the No Record mode, it will not record during the preset day and time range as long as
in the Live Monitoring menu is not selected. Use the No Record mode when you do NOT want the DVR to record
during certain times.
When the DVR is in the Time mode , the
and displays the
icon at the top-left corner of the screen during the scheduled times.
When the DVR is in the Event mode, the red
and displays the
icon at the top-left corner of the screen when any event occurs. When the DVR is in the Pre-Event
recoding mode, the yellow
in the Pre-Event mode, the red
When the DVR is in the Time & Event mode, the DVR will follow the Time settings and the
top-left corner of the screen. The DVR follows the Event settings and the
24
Figure 23 — Schedule setup screen.
button toggles between On and Off. In the Schedule On mode, the DVR
displays at the top-left corner of each camera screen. Panic recording
displays during panic recording.
button. You can select between Simple Mode and Advanced
button to add a schedule item.
icon displays at the top-left corner of the screen. The DVR will record
icon displays at the top-left corner of the screen. The DVR will record
icon displays when there is no event, and the DVR is not recording. When the DVR is
and
display when any event occurs and the DVR starts recoding.
button allows you to set the recorded image
button, and the Schedule setup screen appears.
< Advanced Mode >
button to change the days that the scheduled recording will
button to change the time range that the scheduled recording
button to change the recording mode that will be used.
icon displays.
(Panic)
icon displays at the
Advertisement
Table of Contents
