Record Table Search; Figure 76 - Record Table Search Screen - Speco LS16 Operation Instruction Manual

8 & 16-channel
Table of Contents

Advertisement

Operation Instruction

Record Table Search

< Compact View >
< Standard View >
Recording information about video images currently displayed on the screen displays on the recording status bar. A
grey vertical line indicates the current search position. To search specific video, move the vertical line by using the
Left or Right arrow buttons on the front panel or by clicking the mouse on the desired segment.
If the DVR's time and date have been reset to a time that is earlier than some recorded video, it is possible for the DVR
to have more than one video stream in the same time range. In this case, the overlapping time range in the record table
will be separated by a yellow vertical line .
NOTE: The recorded data in the time range located after the yellow vertical line is the latest.
There are three view modes. Standard view, Expanded view and Compact view. Standard view (default) displays
combined recording information of all camera channels currently displayed on the screen. In the Standard view mode,
selecting the
icon located at the bottom switches to the Expanded view mode. The Expanded view displays the
recording information of each camera channel currently displayed on the screen. Selecting the
view mode switches to the Compact view mode which displays only the toolbar. Selecting the
view mode switches to the Standard view mode, and selecting the
Standard view mode.
Selecting
or
located at the bottom zooms the record table. Selecting
and selecting
displays 24 hours (3-minute based) at once. To move to earlier or later times that are not shown in the
current record table screen, select the arrows located at the end of the times by using the arrow buttons on the front panel.
NOTE: If the DVR has images recorded in more than one recording mode in the same time range, the recording
status bar displays recording information in the following priority order: Panic  Pre-Event  Event 
Time. The color of the bar indicates different recording modes: Red for Panic, Yellow for Pre-Event,
Purple for Event, and Blue for Time.
Selecting
located at the bottom displays the Calendar Search screen. See the following Calendar Search section for
details.
Selecting
located at the bottom displays the Search menu.
 Go To: Displays the first or last recorded image, or searches by date and time (see the previous
 Clip-Copy: Clips a video segment and saves it (see the following Clip Copy section for more
 Print: Prints the current playback image.
 Digital Deterrent Record: Extracts audio files from recorded audio on the DVR see Chapter 3
 Zoom: Zooms the current playback image.
 Slow Play: Plays video at low speed (x1/2, x1/3, x1/4, x1/6 and x1/8).
62
Figure 76 — Record Table Search screen.
Searching Video – Go To section of this chapter for more details).
details).
– Configuration – Digital Deterrent section for more details).
< Expanded View >
icon in the Expanded view mode switches to the
displays eight hours (1-minute based),
icon in the Standard
icon in the Compact

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ls8

Table of Contents