Motion Detection; Figure 28 - Alarm-In Actions 1 Screen; Figure 29 - Alarm-In Actions 2 Screen - Speco LS16 Operation Instruction Manual

Highlight the Actions 1 and Actions 2 tabs, and the Actions 1 and Actions 2 setup screens appear.
Figure 28 — Alarm-In Actions 1 screen.
Highlight the desired box under the Alarm-Out heading, and press the
appear. Select the Alarm Output connectors that you would like to activate whenever the DVR detects an input on the
associated alarm input. You can also set the DVR's internal buzzer to sound.
NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in the
Alarm-Out setup screen (Schedule tab).
Highlight the desired box under the Notify heading, and press the
Figure 29 — Alarm-In Actions 2 screen.
Highlight the desired box under the Digital Deterrent heading, and press the
When set to On, the DVR will sound whenever it detects an input on the associated alarm input.

Motion Detection

Highlight Motion Detection in the Event menu and press the
You can set the actions the DVR will take whenever it senses
an input on one of its alarm input connectors.
Highlight the desired box under the Record heading, and press
the
that you want the DVR to record whenever it detects an input
on the associated alarm input.
NOTE: For the Record action, the camera you select
You can toggle the entire list On and Off by highlighting Notification and pressing the
button. You can toggle the individual items On and Off by highlighting that item and
button. Highlight OK and press the
pressing the
NOTE: For the Notify action, the notify item you select should be enabled in the
Notification setup screen and the DVR should be registered in the Speco
Central (Remote Administration System).
Highlight the desired box under the PTZ heading, and press
the
position for each PTZ camera, where you want PTZ cameras
to move to whenever the DVR detects an input on the
associated alarm input.
Highlight the desired box under the Spot Monitor heading,
and press the
appears. Each SPOT monitor can be associated with a camera.
The DVR will display the associated camera on the SPOT
monitor whenever it detects an input on the associated alarm
input.
button. A list of cameras appears. Select the cameras
should be set to the Event or Time & Event
recording mode in the Record Schedule setup
screen.
button. A list of Alarm Outputs and Beep
button. The Alarm-In Notify menu appears.
button to accept your changes.
button. A list of PTZ presets appear. Select the preset
button. A list of SPOT monitors and cameras
button to toggle between On and Off.
button. The Motion Detection setup screen appears.
Digital Video Recorder
27