Remote Control; Figure 67 - Vga Screen; Figure 68 - Remote Control Setup Screen - Speco LS16 Operation Instruction Manual

Figure 67 — VGA screen.
Highlighting Position and pressing the

Remote Control

Highlight Remote Control in the Devices menu and press the
you to select a port and make correct settings for a remote keyboard.
Figure 68 — Remote Control setup screen.
Highlight the box beside Resolution and press the
You can select from 800x600, 1024x768 and 1280x1024.
Highlight Full Screen and press the
button toggles between On and Off. When it is On, the
screen on the VGA monitor displays in full screen mode.
Highlighting Preview and pressing the
to preview how the screen will be displayed on the VGA
monitor.
button allows you to adjust the screen position on the VGA monitor.
Use the arrow buttons on the setup screen to move the VGA screen
position in the direction you want. Selecting the
returns to the previous position.
button. The Remote Control setup screen allows
Highlight the box beside Port and select from None, RS232
and RS485. If the RS232 port and RS485 port are in use for
PTZ control, networking or text input, the remote keyboard
cannot be configured.
Highlight Setup... and select the correct Baud Rate, Parity,
Data Bits and Stop Bits for the device you are connecting to
the DVR.
Highlight the box beside Remote Control Product and
select the device from the list.
Digital Video Recorder
button.
button. Pressing the
button allows you
button at the center
49