System Date / Time Setting; Set Date / Time - Speco DVR-4TN Manual

User's Manual
3.5
3.5.1
26
Move the cursor up / down over the OSD items using the Direction keys and
press ENTER to enter the selected sub-menu.
System Date / Time Setting
The user can set the current date, time and other OSD parameters in the
Date/Time menu. The administrator's privileges are required for entering the
submenu. In the OSD Main menu, select «System Setup» and press ENTER,
then select «Date/Time» to access the Date/Time menu; the menu displays
as follows.
Date/Time
1, Date 2005/02/21
2. Time PM10:39:26
3. Date/Time Display 1 Row
4. Date Display Mode Y/M/D
5. Time Display Mode 24 HR
6. Date/Time Order Date First
7. Daylight Saving Time OFF .
8. DST Start Apr, 1st Sun, 02:00
9. DST End Apr, Last Sun, 02:00
10, DST Bias 60 Min
Set Date / Time
Set Date / Time
Select <Date> / <Time> and press ENTER to adjust the settings. LEFT /
RIGHT keys are used to move the cursor to previous or next field, ENTER is
for selecting, and UP / DOWN are used to change the value in the selected
field. `
NOTE: The reset date / time setting applies for recording new video,
the date and time of previously recorded video will not be changed.
NOTE: To avoid record database corruption, after changing the date /
time setting, it is recommended to clear the database.
Date / Time Display
Users are allowed to choose to set the date / time OSD displays in 1 or 2 rows.
Use the UP / DOWN keys to change the setting. The default is to display the
date / time OSD in one row.
DVR-4TN/8TNASTN/16TSA6TT Series
SPECO TECHNOLOGIES 05/07