Operation Instruction
ID Button
If a DVR System ID is set to 0, the infrared remote control will control that DVR without any additional operations.
(Refer to the System Information setup screen in this chapter for further information on setting the System ID.) If the
system ID is 1 to 16, you must to press the
control that DVR. If the System ID of two or more DVRs is set to 0, those DVRs will react to the infrared remote control
at the same time.
Camera Buttons
Pressing the individual camera buttons will cause the selected camera to display full screen. Buttons 1 to 9 are also
used to enter passwords.
Sequence Button
When in the Live Monitoring mode, pressing the
Login/Logout Button
Pressing the
LOGIN/OUT
Arrow Buttons
These buttons are used to navigate through menus and GUI. You can also use them to change numbers by highlighting
a number in the menu and using the Up and Down arrow buttons to increase or decrease the number's value. These
buttons are also used to control Pan and Tilt when in the PTZ mode.
When in the PIP display format, pressing the Up and Down arrow buttons moves the position of the small screen
counter-clockwise and clockwise.
Pressing the Left and Right buttons moves through screen pages in the Live Monitoring mode and Search mode.
Menu Button
In the Live Monitoring mode and Search mode, pressing the
Playback Buttons
Rewind: Pressing the
speed from
,
and
Play/Pause: Pressing the
The screen displays when the DVR is in the Pause mode and the screen displays when the DVR is playing back
video.
Fast Forward: Pressing the
playback speed from
Stop: Pressing the
Backward: When in the pause mode, pressing the
Forward: When in the pause mode, pressing the
In the Live Monitoring mode, pressing any playback button enters to the Search mode.
Alarm Button
Pressing the
button resets the DVR's outputs including the internal buzzer during an alarm.
ALARM
10
button and then press the number button (1 to 16 (+10 & 6)) in order to
ID
SEQUENCE
button displays the Login or Logout screen.
button plays video backward at high speed. Pressing the button again toggles the playback
.
button plays back video at regular speed and pressing the button again pauses video.
button plays video forward at high speed. Pressing the button again toggles the
,
and
.
button stops playback and enters the Live Monitoring mode.
button displays live channels sequentially.
button displays the menu icons at the top of the screen.
MENU
button moves to the previous image.
button moves to the next image.