Speco LS16 Operation Instruction Manual page 24

Operation Instruction
Select the desired file and press the
the selected software package. Highlighting the Cancel button and pressing the
upgrading the software. If the upgrade package file is not installed on the DVR properly, you will get an error message.
The system restarts automatically after completing the upgrade.
CAUTION: The USB device must be FAT16 or FAT32 format.
NOTE: Even after changing the DVR settings by importing saved settings, the time-related settings (Date/Time,
Time Zone and Daylight Saving Time) will NOT be changed.
CAUTION: The USB device must be FAT16 or FAT32 format.
Highlight Show System Log... and press the
NOTE: When opening the saved .txt file, setting to the proper character encoding and using fixed width fonts
will be required to read the file properly.
The box beside Recorded Data – From / To displays the time information of recorded data.
Highlighting Clear All Data... and pressing the
you wish to clear all data before the DVR erases the video data. Clear All Data... will not clear the System Log.
14
button. Highlighting the Install button and pressing the
You can import saved DVR settings or export the current DVR
settings. To import saved DVR settings, connect the USB device
containing the setup file (.dat) to the DVR. Highlight Setup –
Import... and press the
press the Import button to import the selected settings and change
the DVR settings accordingly. Highlight Include Network Setup
and press the
to Off, the network settings will not be changed.
To export the current DVR settings, connect the USB device to the
DVR. Highlight Setup – Export... and press the
Highlight the box beside File name and press the
virtual keyboard allows you to enter the file name. Selecting Export
will save the current settings in .dat file format on the USB device.
button to display the System Log.
The System Log screen lists system activities (up to 5,000
from the latest) that have occurred along with the time and
date. The
system activities of the remote site. You can scroll through
the log pages by using the Up and Down arrows, or you can
go directly to a log page by entering the log page number in
the box at the bottom left of the screen. Highlight Close and
press the
To export the system log information, connect the USB device to
the DVR. Highlight Export... and press the
box beside File name and press the
allows you to enter the file name. Selecting Export will save the
log information in .txt file format on the USB device.
button will clear all video data. You will be asked to verify that
button will close the window without
button. Select the desired setup file and
button to toggle between On and Off. When set
icon will be displayed in the last column for
button to exit the screen.
button. A virtual keyboard
button will install
button.
button. A
button. Highlight the