Figure 65 - Main Monitor Screen; Figure 66 - Spot Monitor Screen - Speco LS16 Operation Instruction Manual

Operation Instruction
Highlight the Main Monitor tab to switch to the Sequence screen.
Figure 65 — Main Monitor screen.
You can define the screen layout in a variety of formats and set the DVR to sequence through the different screen layouts
(pages) so that all the cameras will be displayed. You can also set up the DVR to display one camera or a group of
cameras all the time while cycling through the remaining cameras in a "cameo" window. This can be done with one
camera displayed full screen while displaying the cameo window as a PIP (picture in picture), or displaying the cameras
in a grid pattern with the bottom right window as the cameo.
NOTE: Sequence cannot be used in the 4x4 display mode of the 16-channel, and 3x3 mode of the 8-channel DVR.
You can adjust the display dwell time by highlighting the box beside Interval and pressing the
select dwell intervals ranging from 1 second to 1 minute.
Highlight Event Monitoring On and press the
it is On, the DVR will display the camera associated with the event when an event occurs.
Highlight the Spot Monitor tab to switch to the Spot Monitor screen.
Figure 66 — Spot Monitor screen.
Highlight the VGA tab to switch to the VGA screen.
48
Highlighting OSD Margin... and pressing the
be displayed on the monitor. You can adjust the horizontal and vertical margins
so that text and icons will not be hidden beyond the edges of the monitor.
Highlight the box beside Mode and press the
can select between Full Sequence and Cameo Sequence.
Pressing the
and the DVR can sequence cameras in two modes: "Full" and
"Cameo". In the Full mode, the DVR sequences through the
cameras and displays them full screen. In the Cameo mode,
the bottom right window in a multi-screen format sequences
through the cameras.
NOTE: Any cameras that are Off, have lost video or are set
button. Pressing the
You can define which cameras display sequentially on the
Spot Monitor. Highlight the box in the Channels column
and press the
button displays how OSD text will
button causes the DVR to sequence cameras,
SEQ
to Covert (unless the user has authority to view
covert cameras) will be excluded from the Cameo
sequence.
button toggles between On and Off. When
button.
button. You
button. You can