Time Search - Speco HRLN User Manual

Alarm Management
: Smart playback settings button. Click to set intrusion percentage.
: Full screen motion button.
: Motion button.
: Draw line button. You can search the record of crossing the line after drawing the line.
: Draw quadrilateral. You can search the record in this quadrilateral after drawing it.

8.4.3 Time Search

① Click Start Search and ExportTime Search to go to the "Time Search" tab as shown below.
② Click on the bottom of the interface to add a playback camera. A maximum of 16 cameras can be added for playback. Click "Modify" on
the top right corner of the camera window to change the camera and click "Clear" to remove the camera.
③ Click the camera window to play the recording in the small playback box on the left side of the interface. You can set the date on the top left of
the interface, check the event type as required and click the time scale or click
play the record according to the time and event type you set.
④ Drag the color blocks on the time scale to select the record data (or click "Set Backup Time" button on the bottom left corner of the interface
to set the backup start time and end time) and then click "Export" button for record backup. Click "Playback" button to play the record in the
playback interface.
under the time scale to set the time. The camera window will
51
DVR User Manual