Table of Contents
Advertisement
These buttons are also used to control Pan and Tilt when in the PTZ mode. When in the PIP display format, pressing
the Up and Down arrow buttons moves the position of the small screen counter-clockwise and clockwise, and pressing
the Left and Right buttons changes the PIP screen size.
In the playback mode, pressing the
the playback speed from
button plays video forward at high speed. Pressing the button again toggles the playback speed from
and
. The screen displays
moves to the next image and pressing the
USB Port
Two USB ports on the front panel are provided to connect external hard disk or flash drives for video clip copying or
system upgrades. Position external drives close enough to the DVR so that you can make the cable connections, usually
less than 6 feet. Use the USB cable provided with the hard disk drive to connect it to the DVR.
A USB mouse (not supplied) can be connected to one of the ports. You can use the mouse to navigate through the
screens and menus much like you would on a computer.
A PostScript™ USB printer (not supplied) can be connected to one of the ports. You can print selected images resulting
from a search. Refer to Chapter 4 — Operation, Searching Video.
A USB to Serial converter can be connected to the USB port. Multiple text-in devices can be used with a USB to Serial
converter.
Remote Control Buttons
NOTE: For simplicity, the button descriptions in this manual refer to the front panel buttons.
button plays video backward at high speed. Pressing the button again toggles
,
and
. The screen displays
,
and
respectively. When in the pause mode, pressing the
button moves to the previous image.
Figure 4 — Infrared remote control.
Digital Video Recorder
,
and
respectively. Pressing the
ID Button
Camera Buttons
Sequence Button
Login/Logout Button
Arrow Buttons
Menu Button
Playback Buttons
Alarm Button
Layout Button
Zoom Button
PTZ Button
Enter Button
Esc Button
PTZ Control Buttons
Copy Button
Play/Stop Button
,
button
9
Advertisement
Table of Contents
