Advertisement
Advertisement
Related Manuals for Speco CS Series
Summary of Contents for Speco CS Series
- Page 1 POS Manual CS/LS/PS/GS Series DVRs...
-
Page 3: Table Of Contents
POS Manual Table of Contents Introduction ................. 1 Terms ..................1 Connection Diagram ..............2 Text-In Device Setup ..............5 Text-In Search ................8... -
Page 5: Introduction
POS Manual Introduction The DVR receives text-in data from the POS and displays and saves it with the image. The text source may be outputted from not only POS devices but any other devices that output text data through the serial port and network. NOTE: Maximum number of POS devices is limited to number of channel of DVR. -
Page 6: Connection Diagram
POS Manual Connection Diagram Connecting one POS device to the DVR… Connecting four POS devices to the DVR using the 4 Port USB-Serial Converter…... - Page 7 POS Manual Connecting eight POS devices to the DVR using 8 Port USB-Serial Converter… NOTE: When connecting 10 POS devices to the DVR, one 8-ch, one RS 232, and one RS485 with using RS 232 converter. The following is the pin connection diagram for connecting the serial expanded cable to the POS, printer and DVR.
- Page 8 POS Manual - COM1 and COM 2 is for the POS/printer - Connection between the DVR and USB-Serial convertor can be done by USB cable. Connecting 16 x POS devices to the DVR using network… NOTE: Default port number from LAN1 to LAN16 for DVR LAN Text-in setting is set from 14001 to 14016 respectively.
-
Page 9: Text-In Device Setup
POS Manual Text-In Device Setup Highlight Text-In in the Event menu and press the button. The Text-In setup screen appears. Figure 1 — Text-In Settings screen. The DVR can be set to react to text input from devices such as ATMs (Automated Teller Machines) and POS (Point of Sale;... - Page 10 POS Manual Figure 2 — Text-In Device Settings screen using USB-Serial convertor...
- Page 11 POS Manual Figure 3 — Text-In Device Settings screen using LAN Connection Highlight the box beside Port, and press the button. Select from None, RS232, RS485, USB-Serial (1~8), and LAN (1~16). NOTE: If you have set the Port as None, you will not be able to make any changes to the screen.
-
Page 12: Text-In Search
POS Manual On and Off. NOTE: If Any Character is turned On, you will not be able to enter any text in the Transaction Start box. Highlight the box beside Transaction End, and press the button. Use the virtual keyboard to enter the Transaction End string. - Page 13 POS Manual D4/8CS...
- Page 14 POS Manual D8/16LS, D16CS...
- Page 15 POS Manual D24/32PS, D24/32GS...
- Page 16 POS Manual...
-
Page 17: Event Search
POS Manual Speco Central Event Search Click the button on the Search View panel to enter the event search mode. First, click the button, and set up the search condition in the following Event Search dialog box. NOTE: The Event Search dialog box will differ depending on the specifications of the remote DVR.