Table of Contents
Advertisement
Chapter 2 — Installation
Package Contents
The package contains the following:
Digital Video Recorder
Power Cord
Operation Instruction (This Document)
Speco Central Software CD and Operation Instruction
Rack-mount Kit
Assembly Screws for Adding Hard Disk Drives
Infrared Remote Control
Required Installation Tools
No special tools are required to install the DVR. Refer to the installation manuals for the other items that make up
part of your system.
Video Input
Network Port
Factory Reset Switch
Your DVR can be used with either NTSC or PAL equipment.
NOTE: You cannot mix NTSC and PAL equipment. For example you cannot use a PAL camera and an NTSC
monitor.
Video Input
Connect the coaxial cables from the video sources to the BNC Video In connectors.
Video Loop Through
Figure 2 — 16-Channel DVR rear panel.
Video Loop Through
RS232C Port
Power Cord Connector
Digital Video Recorder
RS485 Port
Alarm Input/Output
Audio In/Out
Video Out
3
Advertisement
Table of Contents
