Mitel 5607 Quick Reference Manual

jfqbi
RSMT=táêÉäÉëë=e~åÇëÉí
Display Icons
Signal Strength
Battery Status
Voice Mail
Microphone Off
Loudspeaker On
Loudspeaker Off
Sound Off
Headset Connected
Bluetooth Headset Connected
Bluetooth Enabled
j=jáíÉä=EÇÉëáÖåF=áë=~=êÉÖáëíÉêÉÇ=íê~ÇÉã~êâ=çÑ=jáíÉä=kÉíïçêâë=`çêéçê~íáçåK==«=OMNNI=jáíÉä=kÉíïçêâë=`çêéçê~íáçåK=^ää=çíÜÉê=éêçÇìÅíë=~åÇ=ëÉêîáÅÉë=~êÉ=íÜÉ=íê~ÇÉã~êâë=çÑ=íÜÉáê=êÉëéÉÅíáîÉ=ÜçäÇÉêëK=^ää=êáÖÜíë=êÉëÉêîÉÇK
1 Top/Alarm Button
2 Earpiece Speaker
3 Colour Display
4 Four-way Navigation Key
5 On-hook and On/Off key
6 Tactile Indicators
7 Sound Off Key
8 Space
9 Multi-purpose Connector
10 Microphone
11 Key Lock and Upper/Lower Case
12 Voice Mail Access
13 Off-Hook Key
14 Softkeys
15 Mute and PTT Button
16 Volume Down
17 Volume Up
18 LED
New Message
New Message, Important
Read Message
Missed Call
Incoming Call
Outgoing Call
System Connection
Key Lock
Phone Lock
Personal Alarm
Turning the Handset On/Off
1. Press and hold the On-hook key
until "Switch on/off is displayed.
2. Press "Yes/No."
Making a Call
Dial the number and press . The name of
the called party is displayed if available.
OR
Press to open the call list and use the
Navigation key to scroll the list of your last
twenty calls. Press Call or to dial.
OR
1. Press the Menu softkey.
2. Select Contacts, and select Call List.
3. Select contact from list.
4. Press or Call to dial the number.
Answering a Call
• Press to answer a call in normal
mode.
OR
• Press the Handsfree key to answer in
speaker mode.
Ending a Call
• Press to end a call.
Placing a call on Hold
1. Press the More softkey.
2. Select Hold/Retrieve to put the call on
hold.
To retrieve the Held call:
1. Press the More softkey.
2. Select Hold/Retrieve to retrieve the call
on hold.
nrf`h=obcbobk`b=drfab=
Transferring a Call
1. Press the More softkey.
2. Select New Call.
3. Dial the number to which you want to
transfer the call and press Call.
4. Select Release to connect the two parties.
OR
Wait for an answer, announce the transfer
and then select Release.
Conference
1. Press the More softkey.
2. Select New Call to put the current call on
hold.
3. Dial the number of the third party.
4. Wait for an answer.
5. Press More and then select Join to
conference all the parties together.
Rejecting a Call
• When the ring signal sounds, press
Call information will be stored in the Call
list.
Adjusting Volume Levels
To adjust earpiece volume
during a call:
• Press upper and lower volume
buttons to increase/decrease volume.
To change ringer volume:
• In the menu, select Settings.
• Select Sound & Alerts.
• Select Volume.
• Use the navigation key arrows to adjust
selected volume and press Back to save.