Table of Contents
Advertisement
5604 Wireless Handset User Guide
4, 5
When the text "Please insert old phone in charger" is displayed, replace the new handset with
the old handset. The handset can either be switched on or off.
Note: If the 5603/4 Rack Charger is used, the same charging slot has to be used for both
handsets.
The handset will be restarted and after a few seconds, the text "Saving settings. Do not remove
phone from charger" appears. The charger LED changes to slow orange flashing.
IMPORTANT: Do not remove the handset while the text "Saving settings. Do not remove phone
from charger" is displayed. It may take several minutes.
6, 7
When the text "Please insert new phone in charger" is displayed, replace the old handset with
the new handset. The text "Restoring settings" is displayed.
IMPORTANT: Do not remove the handset while the text "Restoring settings" is displayed
8
When the text "Phone successfully replaced. Please remove phone to restart." appears inthe
display, remove the handset from the charger. The handset is automatically restarted.
LED Indications during Easy Replacement
The following table shows the LED indications that are used for the 5604 and the charger during
the easy replacement procedure.
LED indication
Orange, flashing (1 000 ms on, 1 000 ms off)
Orange, flashing (100 ms on, 800 ms off)
Red, flashing (100 ms on, 800 ms off)
Red, flashing (900 ms on, 100 ms off)
See also Troubleshooting on page 71.
78
Description
File transfer during Easy Replacement.
"Change phone" indication during Easy Replacement.
Error indication during Easy Replacement. Put back old
handset in charger.
Error during Easy Replacement. Service needed for
both handsets.
Advertisement
Table of Contents
