Easy Replacement Of Handset; Before Starting Easy Replacement Procedure - Mitel 5604 User Manual

5604 Wireless Handset User Guide
Figure 10: Easy replaceable battery, unlock the lid and remove the battery

Easy Replacement of Handset

Easy replacement can be used if a handset needs to be replaced due to, for example, a broken
display. The easy replacement procedure is done via the handset display and the 5603/4
Programmer, or the 5603/4 Rack Charger.
The following settings are replaced during easy replacement:
• DECT registration
• User parameters (including User ID)
• Contacts
• The extension number is assigned to the new handset.
The following settings are not replaced during the easy replacement:
• Call list
• Messages
1
• License(s)

Before Starting Easy Replacement Procedure

1. Check that both the old handset (that is, the handset to be replaced) and the new handset
(that is, the replacement handset) are of the same device type (5604).
Note: It is possible to perform Easy Replacement between different licenses (that is;
5604 Standard, 5604 Services, 5604 Personal Alarm, and 5604 Dect Location). The new
handset's license is not replaced by the old handset's license during the procedure
2. Make sure that the handset batteries are charged before starting the easy replacement
procedure.
3. Switch off the new handset by long pressing
1. A license (that includes the handset variant and/or license dependent features) can be moved to another handset using
PDM/WSM.
76
.
1
.