Table of Contents
Advertisement
5604 Wireless Handset User Guide
Logoff Handset While Charging
Note: This feature requires that the parameter "Phone mode" is configured. See Mitel
5604 Wireless Handset Configuration Manual.
When the handset is placed in a charger it can be logged off while it is charging. Call list and
message list will be deleted when the handset is logged out. When it is removed from the
charger, the user needs to log on again.
1. Select "In charger".
2. Select "Logout".
Messages Absence While Charging
When the handset is placed in a charger, message absence can be enabled while it is charging.
See also Redirect Calls While Charging on page 47. The function is automatically cancelled
when the handset is removed from the charger.
When an application/system sends a message to a handset, it will receive an indication that
the handset is absent. If a handset is absent, the application/system determines if the message
shall be sent to the handset or not, or redirected to another handset.
Note: If a message is sent from a handset, it will not receive an indication that the recipient
is absent.
1. Select "In charger".
2. Select "Message Absence".
Deactivate the Charging Mode
1. Select "In charger".
2. Select "No action".
3. Press "Select" to save the setting.
48
Advertisement
Table of Contents
