Table of Contents
Advertisement
5604 Wireless Handset User Guide
The IPDI code is a unique code which has been assigned to the handset, see also Admin Menu
on page 69.
1. Enter the menu by pressing the "Menu" soft key.
2. Select
3. Select "System"
4. Select "Subscribe"
5. Press "Next".
6. Enter System name (optional). If no system name is entered, the default name will be used.
That is System A, System B etc. depending on which system name that is free.
7. Press "Next".
8. Enter PARK code (max. 31 digits). The PARK code may not be needed if there is no alien
DECT system within the coverage area.
9. Enter AC code. The AC code length must be between 1 - 8 digits.
10. Press "Next".
11. An information text "Protection on?" is displayed. Select "Yes" if the new system is to be
protected. It is not possible to delete a protected subscription from the System menu
12. Press "OK". A searching mode starts.
Unsubscribe System
1. Enter the menu by pressing the "Menu" soft key.
2. Select
3. Select "System".
4. Select "Unsubscribe"
5. Select the system to unsubscribe.
6. Press "Yes to unsubscribe the system.
Rename System
It is possible to change the name of the system in the handset.
1. Select "Rename System".
2. Select system to rename.
3. Enter new name.
4. Select "Save".
1. It is not possible to unsubscribe a protected system via the System menu. The unsubscribtion must be made via the Admin menu
or the DECT system.
46
in the menu.
in the menu.
1
.
1
.
Advertisement
Table of Contents
