Message Queuing And Message Priority - Mitel 5604 User Manual

Message Queuing and Message Priority

Note: This feature is applicable for 5604 Services license only.
The default settings is that each message will be displayed without being interrupted by another
message, except if the new message is of higher priority. Messages that are not shown yet are
placed in a queue and the priority and time of reception determine the position in the queue.
There are 9 levels of the priority. 1 is highest priority and 9 is lowest priority.
If several of the messages have the same priority the message that was received first is shown
first.
If a new message with a higher priority is received while another message is read the new
message will replace the old message in the display. The old message will be placed in the
queue. If a new message with equal or lower priority is received while another message is read
the new message will be placed in the queue.
It is possible to configure how long a message will be displayed, see Mitel 5604 Wireless
Handset Configuration Manual.
Prio 9
14:01
Figure 6: Figure of how the queue and priority works
Prio 7
14:04
Prio 8
13:59
Prio 7
14:04
Prio 4
14:03
Prio 4
13:58
Prio 2
13:59
Current Mess
5604 Wireless Handset User Guide
New messages
Prio 4
14:03
Prio 1
14:02
Prio 9
14:01
Prio 2
13:59
Current Mess
Prio 1
14:02
31