In Charger - Mitel 5604 User Manual

Priority
The default order of priority is the order of entered subscriptions. This means that the first
subscribed system has the highest priority. This list can be edited by the user. It is possible to
set the systems in priority by moving them up or down in the list.
Note: This is used in combination with system set to be "Automatic", see Change System
on page 45.
1. Select "Priority".
2. Change the priority if needed by selecting "Up" or "Down". The priority will be saved when
"Back" is selected.

In Charger

Redirect Calls While Charging
Calls can be redirected to another extension when the handset is placed in a charger. In addition,
message absence is also enabled when calls are redirected. SeeMessages Absence While
Charging on page 48 for more information. The function is automatically cancelled when the
handset is removed from the charger.
Note: The extension where the calls shall be redirected to is configured in the PBX.
1. Select "In charger".
2. Select "Redirect".
Switch off While Charging
When the handset is placed in the charger it can be switched off while it is charging. When it
is removed from the charger it will switch on again.
1. Select "In charger".
2. Select "Switch off".
Mute Handset While Charging
When the handset is placed in the charger it can be muted while it is charging. When it is
removed from the charger it will switch on the sound again.
1. Select "In charger".
2. Select "Sound off".
5604 Wireless Handset User Guide
47