Registration - Lexmark C520 Series Service Manual

Diagnostics mode tests (Continued)
EP SETUP
EP Defaults
Fuser Temp
DC Charge Adjust
Dev Bias Adj
Transfer Adjust
EVENT LOG
Display Log
Print Log
Clear Log
EXIT DIAGNOSTICS

Registration

Print registration makes sure the printing is printed properly aligned on the page.
The settings available are:
Bottom Margin
Top Margin
Left Margin
Right Margin
Skew
Quick Test
To set print registration:
1.
Select REGISTRATION from the DIAGNOSTICS menu.
2.
Select Quick Test, and press
To print the Quick Test page:
a.
Press
b.
Press
The message Quick Test Printing... appears on the display.
Retain this page to determine the changes you need to make to the margins settings.
3.
Use or
Go to "EP Defaults" on page
Go to "Fuser Temperature (Fuser Temp)" on page
Go to "DC Charge Adjust, Dev Bias Adj, Transfer Adjust" on
page 3-15.
Go to "Display Log" on page
Go to "Print Log" on page
Go to "Clear Log" on page
This selection exits Diagnostics mode, and Resetting the Printer
displays. The printer performs a POR, and returns to normal mode.
.
appears next to Quick Test.
until the
.
to select the margin setting you need to change, and press
3-14.
3-15.
3-16.
3-16.
3-16.
.
Diagnostic aids
5022-xxx
3-5