Using Presets - Extron electronics CrossPoint 450 Plus Series User Manual

Operation, cont'd
5.
Figure 3-41 — Deselect RGB Delay mode

Using presets

The current configuration (configuration 0) can be saved as a preset in any one of
32 preset memory addresses. Preset locations are assigned to the input buttons
and (where necessary) output buttons. Up to 20 or 32 (depending on the number
of input and output buttons) presets can be selected from the front panel to be
either saved or retrieved. When a preset is retrieved from memory, it becomes the
current configuration.
3-28 CrossPoint 450 Plus and MAV Plus Switchers • Operation
Press and release the RGBHV button (figure 3-41).
The RGBHV button stops blinking
and goes out or becomes
background illuminated.
All input buttons and output buttons
return to unlit or background illumination.
• Only the audio and video ties are stored and recalled; audio gain settings
are not saved, and they do not change when a preset is recalled.
• Presets cannot be viewed from the front panel unless recalled as the
current configuration. Presets can be viewed using Extron's Windows-
based control program. See Chapter 5, "Matrix Software", for more
details.
• The current configuration and all presets are stored in non-volatile
memory. When power is removed and restored, the current configuration
is still active and all presets are retained.
• When a preset is recalled, it replaces the current configuration, which is
lost unless it is also stored as a preset. The recalled preset overwrites all of
the current configuration ties in favor of the preset configuration ties.
• All models have 32 presets; on models with fewer than 32 input and
output buttons, preset numbers that are too high to be available from the
front panel are still accessible under serial port or Ethernet control.
• Figure 3-42 on the next page shows the presets associated with the various
input and output buttons for all three front panel configurations.
Press the RGBHV button
to exit RGB delay mode.
I / O
The Audio button lights red.
RGBHV AUDIO