Download The Startup Page - Extron electronics CrossPoint 450 Plus Series User Manual

HTML Operation
HTML Operation, cont'd
The switcher can be controlled and operated through its Ethernet port, connected
via a LAN or WAN, using a web browser such as Microsoft's Internet Explorer.
The browser's display of the switcher's status or operation has the appearance of
web pages. This chapter describes the factory-installed HTML pages, which are
always available and cannot be erased or overwritten.

Download the Startup Page

Access the switcher using HTML pages as follows:
1.
2.
3.
4.
5.
Figure 6-1 — Enter Network Password page
6.
7.
6-2 CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
If your Ethernet connection to the matrix switcher is unstable, try turning off
the proxy server in your Web browser. In Microsoft's Internet Explore, click
Tools > Internet Options > Connections > LAN Settings, uncheck the "Use a
proxy server..." box, and then click Ok.
Start the Web browser program.
Click in the browser's Address field.
Enter the Matrix IP address in the browser's Address field.
If the local system administrators have not changed the value, the factory-
specified default, 192.168.254.254, is the correct value for this field.
If you want the browser to display a page other than the default page (such as
a custom page that you have uploaded), enter a slash (/) and the file name to
open.
The browser's Address field should display the address in the following format:
xxx.xxx.xxx.xxx/{optional_file_name.html}
The following characters are invalid in file names: {space} + ~ , @ = ' [ ]
{ } < > ' " ; : | \ and ?.
Press the keyboard Enter key. The switcher checks to see if it is password
protected.
If the switcher is not password protected, proceed to step 7.
If the switcher is password protected, the switcher downloads the Enter
Network Password page (figure 6-1).
A User Name entry is not required.
Click in the Password field and type in the appropriate administrator or user
password. Click the OK button.
The switcher checks several possibilities, in the following order, and then
responds accordingly:
a. Does the address include a specific file name, such as 10.13.156.10/
file_name.html? If so, the switcher downloads that HTML page.