Example 8: Recalling A Preset - Extron electronics CrossPoint 450 Plus Series User Manual

Example 8: Recalling a preset

The following steps show an example in which a preset is recalled to become the
current configuration. The steps show the front panel indications that result from
your action.
1. Press and release the Esc button (figure 3-47).
Press the Esc button to clear all
C O N T R O L
VIEW
ENTER PRESET
The button flashes
Figure 3-47 — Clear all selections
2. Press and release the Preset button (figure 3-48).
Press and release the
Preset button.
The Preset button lights.
PRESET
All input buttons with
assigned presets light red.
Figure 3-48 — Enter Recall Preset mode
3. Press and release the input or output button for the desired preset
(figure 3-49).
Press and release the Input 1 button.
The button blinks red to indicate that this
preset number is selected but not recalled.
1 2 3
17 18 19 20 31 32
= Blinking button
Figure 3-49 — Select the preset
Figure 3-42 on page 3-29 shows the presets associated with the various input
and output buttons for all three front panel configurations.
CrossPoint 450 Plus and MAV Plus Switchers • Operation
selections.
ESC
once.
Red
(Preset Assigned)
1 2
17 18 19 31 32
(No Preset Assigned)
ENTER
I
4 15 16
N
The Enter button blinks
P
to indicate the need to
U
recall the preset.
T
S
I
3 15 16
N
P
U
T
S
Unlit
C O N T R O L
VIEW ESC
PRESET
3-31