Extron electronics CrossPoint 450 Plus Series User Manual page 55

Operation, cont'd
4.
Figure 3-8 — Select the outputs
5.
Figure 3-9 — Press the Enter button
Figure 3-10 — Example 1, final configuration
3-12 CrossPoint 450 Plus and MAV Plus Switchers • Operation
Press and release the output 3, output 4, and output 8 buttons (figure 3-8).
The entire set of ties can be canceled at this point by pressing and releasing the
Esc button. The Esc button flashes green (matrix sizes up to 1616) or red
(matrix sizes 3232 and above) once.
Press and release the Output 3, Output 4, and Output 8 buttons.
The buttons blink amber to indicate that the selected RGBHV or video and audio
input will be tied to these outputs.
1 2 3 4 5
17 18 19 20 21 22 23 24 31 32
Press and release the Enter button (figure 3-9).
Press the Enter button to
confirm the configuration
change.
All input buttons and output buttons
ENTER
return to unlit or background illumination.
The Enter button returns to
unlit or background
illumination.
The current configuration (figure 3-10) is now:
• Input 5 video and audio tied to output 3, output 4, and output 8
Input 5 (video/audio) tied
to outputs 3, 4, and 8.
Input
5
3
Output
4
8
O
6 7 8 15 16
U
T
P
U
T
S
Video
Audio
C O N T R O L
VIEW ESC
ENTER PRESET
The Enter button blinks
green to indicate the need to
confirm the change.