Using Presets; Example 4: Save A Preset - Extron electronics DXP Series User Manual

Serial digital video matrix switchers
Table of Contents

Advertisement

im Vertrieb von
Operation, cont'd

Using presets

The current configuration (configuration 0) can be saved as a preset in any of 16
preset memory addresses. On the DXP 88 SDI, presets 1 through 8 are assigned to
the input buttons 1 through 8, and presets 9 through 16 are assigned sequentially to
output buttons 1 through 8 (figure 3-17). On the DXP 44 SDI, presets 1 through 4
are assigned to input buttons 1 through 4 and presets 5 through 8 are assigned to
output buttons 1 through 4.
All presets, including DXP 44 SDI presets 9 through 16, which are not available
from the front panel, can be stored and retrieved via the RS-232/RS-422 link.
Preset #
Preset #
Figure 3-17 — Presets assignment to input and output buttons

Example 4: Save a preset

The following steps show an example in which, on a DXP 88 SDI, the current
configuration is saved as a preset. Each step shows the front panel indications that
result from your action.
1.
Figure 3-18 — Selecting save preset mode
www.camboard.de
3-10
Digital XPoint Matrix Switchers • Operation
CAMBOARD Electronics
DXP 88 SDI
INPUTS
1 2 3 4 5 6 7 8
1
2
3
4
5
6
7
1
2
3
4
INPUTS
1 2 3 4
DXP 44 SDI
1.
The current configuration and all presets are stored in non-volatile
memory. When power is removed and restored, the current configuration
is still active and all presets are retained.
2.
When a preset is recalled, it replaces the current configuration, which is
lost unless it is also stored as a preset. The recalled preset overwrites all of
the current configuration ties in favor of the preset configuration ties.
The switch mode, quick or enter, is for ties only and has no effect on saving
presets.
Press and hold the Preset button for approximately 2 seconds (figure 3-18).
2 Seconds
PRESET
Press and hold the Preset button until it blinks.
Outputs displayed until the DXP enters save preset mode.
1 2 3 5 6
4
7 8
Tel. 07131 911201
Fax 07131 911203
OUTPUTS
1 2 3 4 5 6 7 8
8
9
10
11
12
13
14
5
6
7
8
OUTPUTS
1 2 3 4
PRESET
S a v e
P r e s e t
ce-info@camboard.de
15
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxp 88 sdiDxp 44 sdi

Table of Contents