Extron electronics CrossPoint 450 Plus Series User Manual page 123

Programmer's Guide, cont'd
Command/response table for SIS commands (Cont'd)
Command
View ties, gain, volume, mutes, presets, and DSVP (continued)
View DSVP (sync frequency)
View connections
(CrossPoint 450 Plus only)
Information requests
Information request
Example:
Request part number
Example:
There are up to three separate sets of Extron firmware that the switcher can report on: the
CrossPoint/MAV Plus controller firmware, which is the overall control firmware; the Ethernet
protocol firmware, which handles the Ethernet interface; and the latest optional Extron firmware
update, which is available at www.Extron.com.
Query controller firmware version
Example:
Query software version (verbose)
Response description: Ethernet protocol firmware version
Example:
Description
1.23-0.14(0.20-32x32 Series - , 00
Response:
Ethernet protocol CrossPoint/MAV firmware version
firmware
Request system status
Response description: +5V•+3.3V•+2.5V•Fan voltage•-5V•-12V•+12V•Temp•Fan1 RPM•Fan2 RPM•Primary PS•Secondary PS
Example:
4-16 CrossPoint 450 Plus and MAV Plus Switchers • Programmer's Guide
ASCII Command Response
(host to switcher) (switcher to host)
,
LS
X1 X15 X15
1 2
0LS
X16 X16
I V X
X2 X3
I V32X16•A32X16
N xx-xxx-xx
N 60-468-01
Q
X17
Q 1.23
-
0Q
X17 X18
-
controller firmware version
0q
* indicates the version running
2000 00:00:00 GMT)-0.25*(0.24-32x32 Series -Thu, 20 Mar 2003 16:39:21 GMT)
S •
X20 X20
S
Fans receiving 11.52 V
4.98•3.30•2.55•11.52•-5.21•-12.35•11.65•78.80•753•774•1•1
5V power system at 4.98V
Additional description
n
•...• Each response is the
X2 X16
connection status of an input,
starting from input 1, n is the
maximum number of inputs for
this model.
•A X V X = V size, A
X2 X3 X2 X3
32 video and 32 audio inputs by
16 video and 16 audio outputs
(CrossPoint 450 Plus 3216 HVA).
See appendix B for part #s.
CrossPoint 450 Plus 2424 HVA
part # is 60-468-01.
The factory-installed
CrossPoint/MAV Plus controller
firmware version is 1.23
(sample value only).
-
Provide a detailed status of the
X18
Ethernet protocol firmware, the
CrossPoint 450 Plus/MAV Plus
controller firmware, and any
firmware upgrade. The
firmware that is running is
marked by asterisk (*). A caret
(^) indicates that the firmware
has a bad checksum or an invalid
load. ?.?? indicates that firmware
is not loaded.
-
updated firmware version
Upload date and time
Updated firmware version
• • • • • • •
X20 X20 X20 X20 X20 X21
Secondary power supply is on and Ok
Fan 1 rotating at 753 RPM
X = A Size.
X2 X3
• • •
X22 X22 X9 X9