Windows Buttons, Drop Boxes, And Trash - Extron electronics CrossPoint 450 Plus Series User Manual

Matrix Software, cont'd

Windows buttons, drop boxes, and trash

The buttons, drop boxes, and trash can on the right side of the program window
perform the following functions:
5-18 CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software
Power — Unavailable for CrossPoint 450 Plus and MAV Plus
switchers, because the switcher power cannot be controlled via
software.
Executive mode — Allows you to lock out front panel operations,
except for the view-only mode functions. Click the button to
cycle between Lock mode 0 (the indicator displays white),
Lock mode 1 (the indicator displays red), and Lock mode 2 (the
indicator displays orange).
See "Setting the front panel locks (Executive modes)" in
chapter 3, "Operation" for more information on the Lock modes.
Room menu — Displays a list of up to 10 rooms. You can select a
room from the list to display it in the window.
A Room is a subset of outputs that are logically related to each
other, as determined by the operator. The CrossPoint 450 Plus
or MAV Plus switcher supports up to 10 rooms, each of which
can consist of from 1 to 16 outputs.
Presets menu — Displays a list of up to 32 global presets and up to
100 room presets (10 rooms x 10 presets per room). You can
select a preset from the list to display it in the window and
either activate it (Go) or delete it (Delete).
Go — Activates the selected preset as the current configuration.
Save as — Allows the current set of ties to be saved as a preset. Enter
the preset number when prompted to do so.
Delete — Allows the current preset to be deleted.
Changes – Take — Allows you to save to file any changes made to the
displayed configuration.
Changes – Cancel — Returns to the previous screen, undoing any
changes you have made.
Trash can — Drag and drop from an input or output button to the
trash can to unmake all ties associated with that input or output.