Button Label Generator; Using The Software - Extron electronics CrossPoint 450 Plus Series User Manual

Button-Label Generator
The Button Label Generator software creates labels that you can place in the
translucent covers of the input select buttons. You can create labels with names,
alphanumeric characters, or even color bitmaps for easy and intuitive input and
output selection. See appendix B, "Reference Information", for the procedure for
removing and replacing the translucent covers.
The Extron Button Label Generator is available on the Extron Web site,
www.extron.com, under the Download Center tab. Click the Software link
(figure 5-17), and download and install the program.
Figure 5-17 — Location of Software on the web site.
By default, the Windows installation creates a C:\Program
Files\Extron\ButtonLabelGenerator directory and places the Button Label
Generator icon into a group or folder named "Extron Electronics".

Using the software

1. To run the Button-Label Generator program, double-click on the
Button-Label Generator icon (shown at right) in the Extron
Electronics group or folder, and click OK when prompted. The
Button-Label Generator window appears (figure 5-18).
Figure 5-18 — Extron's Button-Label Generator window
CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software
The Button Label Generator software is also included on the Extron Software
Products CD-ROM that accompanied the switcher.
5-23