Using Global Presets; Example 7: Saving A Global Preset - Extron electronics MPX 866 A User Manual

im Vertrieb von

Using global presets

Example 7: Saving a global preset

www.camboard.de
CAMBOARD Electronics
Press and release the View button to exit View-Only mode (fi gure 3-37).
6.
Press the View button
to exit View-Only mode.
CONTROL
The View LED returns
to the unlit state.
All input LEDs and output
LEDs return to the unlit state.
PRESET VIEW
Figure 3-37 — Press the View button to exit View-Only mode
The current confi guration (confi guration 0) can be saved as a preset in any one of
32 global preset memory addresses. Up to 26 of those resets can be selected from
the front panel to be either saved or retrieved. Global preset locations 1 through
14 are assigned to the input buttons. Global presets 15 through 26 are assigned
to the output buttons. Global presets 27 through 32 are available via the RS-232
and Ethernet links only. When a preset is retrieved from memory, it becomes the
current confi guration.
N •
Only the audio and video ties are stored and recalled.
Audio gain and volume settings are not saved, and they do not
change when a preset is recalled.
The video format (composite or S-video) for outputs 11 through 14 are
not saved, and they do not change when a preset is recalled.
• Presets cannot be viewed from the front panel unless recalled as the current
confi guration. Presets can be viewed using Extron's Windows-based control
program. See Chapter 5, Matrix Software, for more details.
• The current confi guration and all presets are stored in non-volatile memory.
When power is removed and restored, the current confi guration is still active
and all presets are retained.
• When a preset is recalled, it replaces the current confi guration, which is lost
unless it is also stored as a preset. The recalled preset overwrites all of the
current confi guration ties in favor of the preset confi guration ties.
In the following example, the current confi guration is saved as a preset. The steps
show the front panel indications that result from your action.
1. Press and release the Esc button (fi gure 3-38).
Press the Esc button to clear all selections.
CONTROL
ENTER PRESET VIEW
= Blink once
The LED blinks once.
1
Figure 3-38 — Clear all selections
Tel. 07131 911201
MPX 866 A Media Presentation Matrix Switcher • Operation
Fax 07131 911203
1
ESC
ce-info@camboard.de
3-23