Extron electronics CrossPoint 450 Plus Series User Manual page 73

Operation, cont'd
2.
Press and hold the Preset button until it blinks.
PRESET
2 seconds
Figure 3-44 — Enter Save Preset mode
3.
Press and release the Input 1 button.
Figure 3-45 — Select the preset
4.
Figure 3-46 — Press the Enter button
3-30 CrossPoint 450 Plus and MAV Plus Switchers • Operation
Press and hold the Preset button for approximately 2 seconds until it blinks
(figure 3-44).
PRESET
All input buttons with assigned
presets light red.
If you then save the configuration
to a lit preset number, the configuration
data at that preset location
will be overwritten.
Press and release the input or output button for the desired preset
(figure 3-45).
•
The button blinks red to indicate that this preset
number is selected but not saved.
1 2 3 4 5 6
17 18 19 20 21 22 23 24 31 32
Figure 3-42 on page 3-29 shows the presets associated with the various input
and output buttons for all three front panel configurations.
Press and release the Enter button (figure 3-46). The current configuration is
now stored in the selected memory location.
Press the Enter button to
save the preset.
C O N T R O L
VIEW ESC
ENTER PRESET
The Enter and Preset
buttons return to unlit or
background illumination.
Red
(Preset Assigned)
1 2 3
17 18 19 20 31 32
(No Preset Assigned)
ENTER
•
The Enter button blinks to
indicate the need to save
I the preset.
7 8 15 16
N
•
The Preset button
P
continues to blink.
U
T
S
All input buttons return to unlit
or background illumination.
I
4 15 16
N
P
U
T
S
Unlit
C O N T R O L
VIEW ESC
PRESET