Extron electronics CrossPoint 450 Plus Series User Manual page 67

Operation, cont'd
4.
Figure 3-33 — Assign inputs and outputs
5.
Figure 3-34 — Select an I/O group
3-24 CrossPoint 450 Plus and MAV Plus Switchers • Operation
I/O groups are protected when front panel lock mode 2 is selected. You can
view the groups in lock mode 2, but not change them from the front panel.
If front panel lock mode 2 is selected and you try to perform steps 4 through 6,
the actions are ignored and the Enter, RGBHV/Video, and Audio buttons flash.
Press and release the input 1 through 4 and output 1 through 4 buttons
(figure 3-33).
Press and release the Input 1 through Input 4 buttons.
The selected buttons light green.
1 2 3 4 5
17 18 19 20 21 22 23 24 31 32
Press and release the Output 1 through Output 4 buttons.
The selected buttons light green.
1 2 3 4 5
17 18 19 20 21 22 23 24 31 32
Press and release the Preset button to select group 2 (figure 3-34).
Press and release the Preset button to select group 2.
The button lights amber to indicate the selection.
C O N T R O L
VIEW
ENTER PRESET
Group # 1 2 3
I
6 7 8 15 16
N
P
U
T
S
O
6 7 8 15 16
U
T
P
U
T
S
ESC
4