Example 5: Grouping Inputs And Outputs - Extron electronics CrossPoint 450 Plus Series User Manual

Example 5: Grouping inputs and outputs

In the following example, several switcher inputs and outputs are assigned to
groups. The steps show the front panel indications that result from your action.
1. Press and release the Esc button (figure 3-30).
Press the Esc button to clear all
C O N T R O L
VIEW
ENTER PRESET
The button flashes
Figure 3-30 — Clear all selections
To enter I/O Group mode, press and hold the Input 1 and Output 1 buttons
2.
(figure 3-31).
Press and hold
the Input 1 button
and Output 1 button.
Figure 3-31 — Select I/O Group mode
Press and release the Enter button to select group 1 (figure 3-32).
3.
Press and release the Enter button to select group 1.
The button lights amber to indicate the selection.
ENTER
1
Group #
Figure 3-32 — Select an I/O group
CrossPoint 450 Plus and MAV Plus Switchers • Operation
selections.
ESC
once.
I
1 2 5 16
N
P
U
T
17 18 11 32
S
O
1 2 5 16
U
T
P
U
17 18 11 32
T
S
C O N T R O L
VIEW ESC
PRESET
2 3 4
Release the Input 1 button
and Output 1 button.
•
Ungrouped input and
output buttons light.
1 2 5 16
17 18 11 32
2 seconds
1 2 5 16
17 18 11 32
I
N
P
U
T
S
O
U
T
P
U
T
S
3-23