Making Screen Standby Settings; Making Administrator Password Settings - Panasonic KX-VC500 Operating Manual

Contacts and Settings
Note
•
Contact your dealer for more information on
obtaining the latest firmware and Operating
Manual.
•
If the checking, downloading, or installing of
a software update fails, an error message is
displayed. Press [Enter] to restart the
system.
Please try the following:
a.
Check that the DNS server's IP address
or the proxy server's IP address and
proxy port are correct, and then try
updating the software again.
b.
If the above step is unsuccessful, try
updating the software again later. The
network may be currently very busy.
If the retry fails several times, there might
be a problem with your communication
lines. Please contact your dealer.
Making Screen Standby
Settings
When the unit or remote control are not operated or a
video conference call is not received for a specified
length of time, the unit enters standby mode. You can
set the length of time here.
1.
Login to the administrator menu (Page 84).
•
The admin menu screen is displayed.
2.
Press [ ].
•
The second page is displayed.
88 Operating Manual
3.
Use [ ][ ] to select "Standby Setting" and
press [Enter].
•
The screen standby settings screen is
displayed.
4.
Enter the length of time (0–99) in minutes until the
unit enters screen standby mode (default: 10).
Note
•
If you set "0", the unit will not enter screen
standby mode automatically. However, if
you press the remote control's [Video Out
On/Off] button, the unit will enter screen
standby mode even if "0" is set.
5.
Press [G].
•
A dialog box to confirm the saving of settings is
displayed.
6.
Use [ ][ ] to select "Yes" and press [Enter].
•
The admin menu screen is displayed.
7.
Press [Home].
•
The Home screen is displayed.
Making Administrator
Password Settings
1.
Login to the administrator menu (Page 84).
•
The admin menu screen is displayed.
2.
Press [ ].
•
The second page is displayed.
Document Version 2011-02