Display Unit Information - Panasonic KX-VC500 Operating Manual

Contacts and Settings
(This mode switches the display resolution
according to the condition of the network.)
–
"Auto" (default): This mode selects either "Full
HD" or "HD" according to the available
bandwidth.
Note
•
Selecting "Auto" or "HD" is recommended.
•
When "Full HD" is selected, if the other
party has a low bandwidth, the display
resolution may be lower than when "HD" or
"Auto" is selected.
•
If the field frequency is different between
parties in a video conference call, the
maximum resolution will be "HD", even if
you have specified "Full HD".
•
When making a 3-party video conference
call, the main video camera will be
automatically set to "HD", even if you have
specified "Full HD".
•
When making a 4-party video conference
call, the main video camera and sub video
camera will be automatically set to "HD",
even if you have specified "Full HD".
"Default MIC Mute set": Use [
whether to mute the microphone(s) at the start of a
received video conference call.
–
"ON": Mutes the microphone(s).
–
"OFF" (default): Does not mute the
microphone(s).
"Active call Menu": Use [
to display the guide when a video conference call
begins.
–
"ON" (default): Displays the guide.
–
"OFF": Hides the guide.
"Noise reduction": Use [
to enable noise reduction when a video conference
call begins.
–
"ON": Enables noise reduction.
–
"OFF" (default): Disables noise reduction.
"Call Limit time": Enter the maximum length of
time for the duration of a video conference call (in
hours and minutes).
Note
•
If you set 0 hours 0 minutes (default), the
call time is unlimited.
•
If the duration of a video conference call
exceeds the specified length of time, the call
will be automatically disconnected.
78 Operating Manual
][ ] to select
][ ] to select whether
][ ] to select whether
"MIC detection": Use [
enable the detection of the connection status of the
Boundary Microphones.
–
"ON" (default): Enables the detection of
Boundary Microphones.
–
"OFF": Disables the detection of Boundary
Microphones.
Note
•
When not using Boundary Microphones, set
this to "OFF".
"Network Connection Status": Use [
select whether to display the network status
indication.
–
"ON" (default): Displays the network status
indication.
–
"OFF": Hides the network status indication.
"Still image quality": Use [
display resolution to use when you send still images
from the sub video camera to other parties.
–
"Full HD" (default): The resolution of still
images is Full HD.
–
"HD": The resolution of still images is HD.
Note
•
If the network has low bandwidth and a
high rate of packet loss, selecting
"HD" is recommended. For details,
contact your dealer.
•
If the field frequency is different
between parties in a video conference
call, the display resolution will be "HD",
even if you have specified "Full HD".
•
During a 4-party video conference call,
the display resolution will be "HD", even
if you have specified "Full HD".
5.
Press [G].
•
A dialog box to confirm the saving of settings is
displayed.
6.
Use [ ][ ] to select "Yes" and press [Enter].
•
The system settings screen is displayed.
7.
Press [Home].
•
The Home screen is displayed.

Display Unit Information

You can view the setting information for the unit.
][ ] to select whether to
][ ] to
][ ] to select the
Document Version 2011-02