Panasonic KX-VC500 Operating Manual page 37

[G]: The screen will be switched to Input screen 3.
•
IP addresses will be cleared if you move to another
input screen without pressing [Start].
•
When connecting to an MCU or non-Panasonic
video conference system, you cannot make 3-party/
4-party video conference calls.
3 Enter the IP address.
•
If the IP address contains 1 or 2 digit numbers, enter
these numbers as they are. Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
Note
•
You can refer to the contact list when entering
the IP address, by following the procedure
below:
1.
Press [B].
•
2.
Use [
to refer to.
•
•
3.
Press [Enter].
•
•
You cannot enter the IP address using the call
history.
4 Press [Start] to start the call.
•
You can also start the call by pressing [Enter].
5 When you want to end the call, press [End].
•
The Home screen is displayed.
Document Version 2011-02
The contact list screen is displayed.
][ ] to select the contact you want
You can use [ ][ ] to select the
displayed tab (Page 34).
You can use the numeric buttons of the
remote control to select the displayed
tab (Page 34).
The display returns to the input screen.
Starting a Video Conference
Operating Manual 37