Setting One-Touch Connection Numbers; Making Screen Standby Settings - Panasonic KX-VC1300 User Manual

"DTMF layout change": Use [
whether other parties can use remote control
operations to perform screen layout change
operations.
–
"ON": Enable operations by Sub Sites using the
remote control.
–
"OFF" (default): Disable remote control
operations by Sub Sites.
"Auto move to CP1": Use [
whether the function that switches the screen layout
to CP1 when content sharing is started is enabled
or not.
–
"ON" (default): Switching to CP1 is enabled.
–
"OFF": Switching to CP1 is disabled.
"Other Site's Audio": Press [ENTER] and use
[ ][ ] to select whether the audio from Sub Sites
is combined with the audio from the Main Site.
–
"Mix (Auto)" (default): Audio from the loudest
4 sites is automatically mixed together.
–
"Mute": Mutes the audio of Sub Sites. Only the
audio of the Main Site is output.
"Display far site's Mute icon": Use [
select whether the Sub Site audio status icon is
displayed.
–
"ON" (default): The audio status icon is
displayed.
–
"OFF": The audio status icon is not displayed.
"Display Presentation Mode icon": Use [
[ ] to select whether an icon is displayed to
indicate that the MCU mode is Presentation Mode.
–
"ON" (default): The presentation icon will be
displayed.
–
"OFF": The presentation icon will not be
displayed.
"Secondary Bandwidth Selection": Press
[ENTER] and use [
communication group thresholds.
–
"Not Specified" (default): Bandwidth threshold
not considered.
–
"256 kbps or more" – "2.0 Mbps or more":
Consider bandwidth to determine the two types
of communication group thresholds.
3.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
4.
Use [ ][ ] to select "Yes" and press [ENTER].
•
The system settings screen is displayed.
Document Version 2015-12
][ ] to select
][ ] to select
][
][ ] to select two types of
Setting One-touch Connection
Numbers
Set the addresses or profiles assigned to the one-touch
connection numbers (1 to 5) displayed on the home
screen.
1.
Select "One-Touch Set." and press [ENTER].
•
The one-touch connection number settings
screen is displayed.
2.
Use [ ][
3.
Press [B].
•
A dialogue box is displayed for selecting which
kind of input method to reference.
4.
Use [ ][
"Contact list" or "Profile" and press [ENTER].
When "Contact list" is selected:
The contact list selection screen is displayed.
] to
1.
Use [
register, and press [ENTER].
•
The one-touch connection number settings
screen is displayed.
When "Profile" is selected:
]
The profile list reference screen is displayed.
1.
Use [
to register and press [ENTER].
•
The one-touch connection number settings
screen is displayed.
5.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use [ ][
•
The system settings screen is displayed.
Making Screen Standby
Settings
When the remote control is not operated or a video
conference call is not received for a specified length of
time, the unit enters standby mode. You can set the
length of time here.
Contacts and Settings
] to select ""Not Registered"".
] to select the reference source,
][ ] to select the other party to
][ ] to select the group name you want
] to select "Yes" and press [ENTER].
User Manual 113