Setting One-Touch Connection Numbers; Making Screen Standby Settings; Making Sound Settings - Panasonic KX-VC1600SX User Manual

Contacts and Settings
"Secondary Bandwidth Selection": Press
[ENTER] and use [
communication group thresholds.
–
"Not Specified" (default): Bandwidth threshold
not considered.
–
"256 kbps or more" – "2.0 Mbps or more":
Consider bandwidth to determine the two types
of communication group thresholds.
3.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
4.
Use [ ][ ] to select "Yes" and press [ENTER].
•
The system settings screen is displayed.
Setting One-touch Connection
Numbers
Set the addresses or profiles assigned to the one-touch
connection numbers (1 to 5) displayed on the home
screen.
1.
Select "One-Touch Set." and press [ENTER].
•
The one-touch connection number settings
screen is displayed.
2.
Use [ ][ ] to select "Not Registered".
3.
Press [B].
•
A dialogue box is displayed for selecting which
kind of input method to reference.
4.
Use [ ][ ] to select the reference source,
"Contact list" or "Profile" and press [ENTER].
When "Contact list" is selected:
The contact list selection screen is displayed.
1.
Use [ ][ ] to select the other party to
register, and press [ENTER].
•
The one-touch connection number settings
screen is displayed.
When "Profile" is selected:
The profile list reference screen is displayed.
1.
Use [ ][ ] to select the group name you want
to register and press [ENTER].
•
The one-touch connection number settings
screen is displayed.
104 User Manual
][ ] to select two types of
5.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use [ ][ ] to select "Yes" and press [ENTER].
•
The system settings screen is displayed.
Making Screen Standby
Settings
When the remote control is not operated or a video
conference call is not received for a specified length of
time, the unit enters standby mode. You can set the
length of time here.
1.
Select "Standby Setting" and press [ENTER].
•
The screen standby settings screen is
displayed.
2.
Enter the length of time (0–99) in minutes until the
unit enters screen standby mode (default: 10).
Note
•
If you set "0", the unit will not enter screen
standby mode automatically. However, if
you press the remote control's
[STANDBY] button, the unit will enter
screen standby mode even if "0" is set.
3.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
4.
Use [ ][ ] to select "Yes" and press [ENTER].
•
The system settings screen is displayed.

Making Sound Settings

1.
Select "Sound Settings" and press [ENTER].
•
The sound settings screen is displayed.
2.
Use [ ][ ] to select the following items for input:
"Welcome Screen Vol.": Press [ENTER] and use
[ ][ ] to select the volume level ("OFF", "Low",
"Medium" [default] or "High") played at the
start-up.
"Ringback Tone Vol.": Press [ENTER] and use
[ ][ ] to select the volume level ("OFF", "Low",
Document Version 2015-03