Panasonic KX-VC500 Operating Manual page 80

Contacts and Settings
2.
Use [ ][ ] to select "Settings" and press
[Enter].
•
The system settings screen is displayed.
3.
Press [ ].
•
The second page is displayed.
4.
Use [ ][ ] to select "MIC Setting" and press
[Enter].
•
The auto settings screen is displayed.
Note
•
If the manual settings screen is displayed,
proceed to step 6.
5.
Press [B].
•
The manual settings screen is displayed.
6.
Use [ ][ ] to select the Boundary Microphone
you want to configure and press [Enter].
7.
Use [ ][ ] to select the Boundary Microphone's
relative position.
"Left side": Sounds on left side are played.
"Right side": Sounds on right side are played.
"Center Mono": All sounds are played through
both the left and right speakers at the same volume.
"Center stereo": Sounds centered on the
microphone are played through both the left and
right speakers at the same volume.
Note
•
When a Boundary Microphone is set to
"Center stereo", make sure that it is placed
with its connector facing the display.
•
For the settings shown in the following
diagrams, the left/right channels are
80 Operating Manual
displayed as viewed from the side of the
main video camera.
Here are examples of the relative position of
Boundary Microphones.
When setting Boundary Microphones in a row
perpendicular to the display:
Display
Speaker
R ch
R ch
R ch
Connector
MIC 1: "Center stereo"
MIC 2: "Center stereo"
MIC 3: "Center stereo"
When setting Boundary Microphones parallel
with the display:
Display
Speaker
R ch
MIC 1 MIC 2
Connector
MIC 1: "Right side"
MIC 2: "Center Mono"
MIC 3: "Left side"
Main video camera
Speaker
L ch
MIC 1
L ch
MIC 2
L ch
MIC 3
Main video camera
Speaker
L ch
MIC 3
Document Version 2011-02