Preparation; Part Names And Usage; Main Unit (Front) - Panasonic KX-VC500 Operating Manual

Preparation

Part Names and Usage

Main Unit (Front)

A
E
Power LED
Shows the power status. The LED is red when the power is on and off when the power is off.
Remote Control Signal Receiver
Receives Remote Control signals. The maximum range of reception is approximately 8 m (26.2 ft) from
front of the unit, and approximately 3 m (9.8 ft) from 20° on each side, total 40°.
Start button
Press to make or manually answer video conference calls (Page 31, Page 41).
End button
Press to end a video conference call.
Power button
Turns the power on and off (Page 26).
Status LED
Shows the operational status of the unit (Page 20).
Home button
Press to display the Home screen (Page 27).
One-Touch Connection buttons (LED lit)
Press to select a dial destination from up to 5 destinations displayed on the Home screen (Page 32).
Note
•
During a video conference call, buttons other than [Power] and [End] cannot be used.
16 Operating Manual
B
F G H
C D
Document Version 2011-02