Making Sound Settings - Panasonic KX-VC500 Operating Manual

Contacts and Settings
2.
Use [ ][ ] to select "Settings" and press
[Enter].
•
The system settings screen is displayed.
3.
Use [ ][ ] to select "Network Settings" and
press [Enter].
•
The network settings screen is displayed.
4.
Use [ ][ ] to select the items you want to set,
and input the relevant data.
•
If the IP address contains 1 or 2 digit numbers,
enter these numbers as they are. Do not enter
like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
5.
Press [G].
•
A dialog box to confirm the saving of settings is
displayed.
6.
Use [ ][ ] to select "Yes" and press [Enter].
•
The system settings screen is displayed.
7.
Press [Home].
•
The Home screen is displayed.

Making Sound Settings

1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [ ][ ] to select "Settings" and press
[Enter].
•
The system settings screen is displayed.
76 Operating Manual
3.
Use [ ][ ] to select "Sound Settings" and press
[Enter].
•
The sound settings screen is displayed.
4.
Use [ ][ ] to select the following items for input:
"Welcome Screen Vol.": Press [Enter] and use
[ ][ ] to select the volume level ("Low",
"Medium" [default] or "High") played at the
start-up.
"Ringback Tone Vol.": Press [Enter] and use
[ ][ ] to select the volume level ("Low",
"Medium" [default] or "High") of an outgoing call
ring.
Note
•
The volume level of the busy tone will be the
same level as the ring back tone.
"Ring Tone Vol.": Press [Enter] and use [
[ ] to select the volume level ("Low",
"Medium" [default] or "High") of an incoming call
ring.
"Default Sound Lev.": Use [
volume level (0–20) at the start of a video
conference call (default: 16).
"Sound Pre-sets": Press [Enter] and use [
[ ] to select the tone ("More Highs",
"Standard" [default], "More Lows", "Voice" or
"Music") at the start of a video conference call
(Page 54).
Note
•
You can listen to a sample of the following
items by pressing [R].
–
"Welcome Screen Vol."
–
"Ringback Tone Vol."
–
"Ring Tone Vol."
]
][ ] to select the
]
Document Version 2011-02