Table of Contents
Advertisement
Making Screen Standby
Settings
When the remote control is not operated or a video
conference call is not received for a specified length of
time, the unit enters standby mode. You can set the
length of time here.
1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [
][
] to select "Settings" and press
[Enter].
•
The system settings screen is displayed.
3.
Use [
][
] to select "Standby Setting" and
press [Enter].
•
The screen standby settings screen is
displayed.
4.
Enter the length of time (0–99) in minutes until the
unit enters screen standby mode (default: 10).
Note
•
If you set "0", the unit will not enter screen
standby mode automatically. However, if
you press the remote control's [Video Out
On/Off] button, the unit will enter screen
standby mode even if "0" is set.
5.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use [
][
] to select "Yes" and press [Enter].
•
The system settings screen is displayed.
7.
Press [Home].
•
The Home screen is displayed.
Making Sound Settings
1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [
][
] to select "Settings" and press
[Enter].
•
The system settings screen is displayed.
3.
Press [
].
•
The second page is displayed.
4.
Use [
][
] to select "Sound Settings" and press
[Enter].
•
The sound settings screen is displayed.
5.
Use [
][
] to select the following items for input:
"Welcome Screen Vol.": Press [Enter] and use
[
][
] to select the volume level ("OFF", "Low",
"Medium" [default] or "High") played at the
start-up.
"Ringback Tone Vol.": Press [Enter] and use
[
][
] to select the volume level ("OFF", "Low",
"Medium" [default] or "High") of an outgoing call
ring.
Note
•
The volume level of the busy tone will be the
same level as the ring back tone.
"Ring Tone Vol.": Press [Enter] and use [
[
] to select the volume level ("OFF", "Low",
Contacts and Settings
]
User Manual
91
Advertisement
Table of Contents
