Panasonic KX-VC500 Operating Manual page 23

6.
Plug in the power cord into the power outlet.
•
Choose an outlet that is convenient for
plugging/unplugging.
System Layout Examples
Display and Main Video Camera
Place the display and main video camera at the same
side of the room.
Note
•
If you use speakers, refer to "Amplifier/Active
Speaker Connection" (Page 25).
Microphones
Up to 4 Boundary Microphones can be connected in
cascade. There are no separate terminals for input and
output on the Boundary Microphones.
Also, Boundary Microphones and general-purpose
microphones can be used simultaneously.
Document Version 2011-02
Note
•
Make sure that the microphones are placed at
least 1 m (3.3 ft) away from the display and
speakers.
•
Do not connect more than 4 Boundary
Microphones. Doing so will cause all Boundary
Microphones to stop working.
•
When 2 or more Boundary Microphones are
connected, if you want to change the output
sent to the other party to stereo, it is necessary
to configure the settings manually (Page 79).
•
If you are connected to an MCU or
non-Panasonic video conference system, the
output sent to the other party will be monaural.
Layout examples (the grey circle indicates the
microphone's range):
(13.1 ft)
Microphone
4 m
(13.1 ft)
Microphone
Preparation
Display
4 m
Display
4 m
(13.1 ft)
Microphone
Operating Manual 23