Panasonic KX-VC500 Operating Manual page 57

Note
•
Pressing [Full Screen] on the remote control will
hide or unhide the other party's information,
duration, and guide displays.
•
When connecting to another Panasonic HD
Visual Communication Unit:
–
While displaying your computer's screen,
the other party cannot press [PC] to display
their own computer's screen.
–
If a sub video camera is connected, you can
also switch to the sub video camera's image
by pressing [Camera Sub] (Page 59).
Only the party that pressed [PC] can perform
this operation. To return to displaying your
computer's screen, press [PC].
–
While displaying your computer's screen,
you can switch to displaying the other
party's image in Layout 1 by pressing [B]
(Page 43, Page 45, Page 48). However, the
other party cannot perform this operation,
and the other party cannot confirm if you are
viewing your computer's screen or the other
party's image. When viewing the other
party's image, the screen layout is fixed to
Layout 1. To return to displaying your
computer's screen, press [B].
•
When connecting to an MCU or non-Panasonic
video conference system:
–
Even while displaying your computer's
screen, note that it is also possible for the
other party to start sharing their computer's
screen.
–
If a sub video camera is connected, you can
also switch to the sub video camera's image
by pressing [Camera Sub] (Page 59). To
return to displaying your computer's screen,
press [PC]. Note that it is also possible for
the other party to start sharing their sub
video camera's image.
–
While displaying your computer's screen,
you can switch to displaying the other
party's image in Layout 1 by pressing [B]
(Page 43). To return to displaying your
computer's screen, press [R].
2 Press [Camera Main] to return to showing the main
video camera's image.
Note
•
Only the party that pressed the [PC] button can
perform this operation.
Document Version 2011-02
Displaying Other Video Sources
Operating Manual 57