Panasonic KX-VC500 Operating Manual page 61

Note
•
Pressing [Full Screen] on the remote control will
hide or unhide the other party's information,
duration, and guide displays.
•
When connecting to another Panasonic HD
Visual Communication Unit:
–
While displaying your sub video camera's
image, the other party cannot press
[Camera Sub] to display their own sub video
camera's image.
–
If a computer is connected you can also
switch to the computer screen's image by
pressing [PC] (Page 55). Only the party that
pressed [Camera Sub] can perform this
operation. To return to displaying your sub
video camera's image, press [Camera
Sub].
–
While displaying your sub video camera's
image, you can switch to displaying the other
party's image in Layout 1 by pressing [B]
(Page 43, Page 45, Page 48). However, the
other party cannot perform this operation,
and the other party cannot confirm if you are
viewing your sub video camera's image or
the other party's image. When viewing the
other party's image, the screen layout is
fixed to Layout 1. To return to displaying
your sub video camera's image, press [B].
•
When connecting to an MCU or non-Panasonic
video conference system:
–
Even while displaying your sub video
camera's image, note that it is also possible
for the other party to start sharing their sub
video camera's image.
–
If a computer is connected, you can also
switch to the computer screen's image by
pressing [PC] (Page 55). To return to
displaying your sub video camera's image,
press [Camera Sub]. Note that it is also
possible for the other party to start sharing
their computer's screen.
–
While displaying your sub video camera's
image, you can switch to displaying the other
party's image in Layout 1 by pressing [B]
(Page 43). To return to displaying your sub
video camera's image, press [R].
2 Press [Camera Main] to return to showing the main
video camera's image.
Note
•
Only the party that pressed [Camera Sub] can
perform this operation.
Document Version 2011-02
Displaying Other Video Sources
Operating Manual 61