Denon ADV-1000 Operating Instructions Manual page 9

• To connect the video signal, connect using a 75 _/ohms video signal cable cord. Using an improper cable can result in a drop in video quality.
• When making connections, also refer to the operating instructions of the other components.
I Connecting a TV/DBS tuner ]
TV/DBS
• Connect tile TV's or DBS tuner's video
output jack (VIDEO OUTPUT) to tile
(yellow) TV/DBS IN jack using a
75 _dohms video coaxial pin plug cord
• Connect the TV's or DBS tuner's audio
output jacks {AUDIO OUTPUT) to the
TV/DBS IN jacks using pin plug
cords
• For devices with optical digital outputs,
connect the digital output terminal to the
ADV-IO00's DIGITAL TV/DBS IN terminal
using an optical transmission cable
TVor DBS tuner
OPTICAL AUDIO VIDEO
_[ _ OUT OUT
C T R L
Monitol TV
1:
MONITOR OUT
• Connect the TV's video
input jack (VIDEO INPUT) to
the _ MONITOR
OUT jack using a 75
_/ohms video coaxial pin
plug cord
Note on connecting the digital input jacks
• theOnlYcapaUdi°beforeSignalSconnectingare input to the digital input iacks
• Use optical cables for optical connections, removing
Connecting a C8 tuner I
V.AUX
• Connect the CS tuner's video output iack (VIDEO OUTPUT) to
the _ (yellow} _LAUX IN iack using a 75 _/ohms video
coaxial pin plug cord¸
• Connect the CS tuner's audio output iacks (AUDIO OUTPUT) to
the _ _LAUX IN iacks using pin plug cords¸
• For devices with optical digital outputs, connect the digital
output terminal to the ADWl000'S DIGITAL _LAUX IN terminal
using an optical transmission cable¸
CS tuner
Dooo_ 0
VIDEO AUDIO
_ _ OUT _UT L
OPTICAL
_2/ohms video coaxial pin plug cords
Connecting the audio output jacks
• Connect the video deck's audio output iacks {AUDIO OUT) to the _ VCR IN jacks, and the
video deck's audio input jacks {AUDIO IN) to the _ VCR OUT iacks using pin plug cords
J
V_deo deck
9