Denon ADV-1000 Operating Instructions Manual page 52

[]
LISTENING TO THE RADIO
Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels 1 to 40.
NOTE:
• if an FM station cannot be preset automaticafly due to poor reception, use the "Manual tuning" operation to tune in the station, then preset it
using the manual "Preset memory" operation.
1
Using the TUNER function, press and
hold the TUNING + and TUNING - _
buttons of the mare unit for 2 seconds
or longer
• "AUTO PRESET?" and "-: NO/+:
START" wifl alternately appear on the
display of the main unit Main unit
• Press the TUNING - button to cancel
O_o ! _ O OOO_oo _ J
7,2
2
Use the TUNING + button to select
"START"
"SEARCH" flashes on the display and
searching begins
"COMPLETED" appears once searching is
completed
Main unit
0o0
_1_ _ O ©OT_ o o
23 1
Example: Tuning in FM/AM stations
Before operating the remote control unit! Tj_EE_. t/c_
Be sure to press the proper remote control mode selector (_
button to set the remote control unit to the AV mode.
-%
Turn the FUNCTION/SELECT knob of the main unit or press
the FUNCTION button of the remote control and select
"TUNER"
2
FUNCTION FUNCTION
/SELECT
Main unit Remote control unit
Select "FM" or "AM".
• The selected "FM AUTO", "FM MONO" or "AM" is
displayed.
• When using the remote control, the mode button is used to
select FM AUTO and MONO.
\
Main unit Remote control unit
-,
Adjust the receiving frequency.
• When a station _,= =,_
is received, the
"TUNED"
indication will
light
Main unit Remote control unit
NOTES:
A humming sound may be heard when using a TV nearby while
receiving AM programs If this happens, move the system as far
from the TV as possible
Auto tuning
• When one of the Tuning +/- button is pressed, the frequency
changes in steps of 0.2 MHz in the FM band, 10 kHz in the AM
band.
• If one of the Tuning +/- button is held for over 1 second, the
frequency continues to change when the button is released
(auto tuning) and stops when a station is tuned in.Tuning will not
stop at stations whose reception _spoor.
• To stop the auto tuning function, press the Tuning +/- button
once
FM Stereo Reception
• When a program being broadcast in "FM AUTO" is received,
the "ST" indicator lights and the program is received in stereo.
• If reception is poor and there is much noise in the stereo signals,
press the BAND or MODE button to set the FM MONO mode
52