Surround Playback - Denon ADV-1000 Operating Instructions Manual

[]
SURROUND PLAYBACK
• Adjustments using the test tones can only be performed in the
"Auto" mode and are only valid for the Auto decode Surround
modes The adjusted levels are automatically stored in the memory.
• Even after adjusting using the test tones, the various channels can
be adjusted using the procedure described below to suit the
program source and your preferences
1
2
© ©'__
© '©"
2-- --2
boo©
Press the TEST TONE button.
TTONE
Remote control unit
Test tones are output from the different speakers Use the
channel volume adjust buttons to adjust so that the volume of
the test tones is the same for all the speakers.
• The channel to be adjusted can be changed using the
CH.SELECT button and the ( { and ) ) cursor buttons on
the remote control unit during the adjustments using the
test tones.
© ©_
© '©"
2-- --2
®®,®,0
1-1/
Select the speaker whose level you want to adjust.
• The channel switches as shown below each time the
button is pressed.
CH.SELECT
Remote control unit
Adjust the volume level of the selected speaker while the
channel level is displayed.
Remote control unit
Remote control unit
After adjusting using the test tones, adjust the channel levels
either according to the playback sources or to suit your tastes,
as described below.
TTONE
Remote control unit
4O